On Wed, Dec 17, 2008 at 11:52 AM, Olivier <[email protected]> wrote: > 2008/12/17 Artifex Maximus <[email protected]> >> Is anyone using the $subject setup? >> >> What I would like to do the following setup: >> 1. OXE is setup for receiving calls, handling Agents >> 2. Asterisk as external IVR on extension 9xxx connected with ISDN (Q.931) >> PRI >> >> I've talked with support person at Alcatel and he said that Q.931 >> cannot handle this situation because after calls "leave" OXE it does >> not know anything so I cannot hangup in Asterisk and call will use two >> channel. Is it right? He said that ABCF2 or Q.SIG is able handling >> this situation because Q.SIG is an extension to Q.931. I take some >> search on topic and find out that Asterisk's Q.SIG not fully >> implemented. Is Asterisk implementation enough for this kind of setup? > What is needed is that the Asterisk box should either : > - forward incoming call to the right endpoint, using a single channel, > - open a second channel and remain in media path till it ends. Thanks for your answer! You are right and first option what I am looking for. I have asked support staff and sending back DTMF on open channel does not help.
> I'm not an authority on this topic, but I would say that, as OXE and > asterisk are connected through an E1/T1 link, > - you must upgrade OXE and Asterisk to Q.SIG to get forwarding option (and > check asterisk's QSIG supports Call Deflection), > - casual PRI is enough if you stick with 2 channels option. Unfortunately I am not expert on this topic as well but second option is not good for us. The question is how good Asterisk's Q.SIG implementation for this task. > If you don't expect to get more than 15 (or 12) calls at a time, I don't see > any real downside to use option 2. Often we have more than 15 calls at same time and that is why first option is not acceptable. Bye, Zsolt _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
