If you are connecting to BRI lines then you should be TE - not NT. You can run as TE ptp or ptmp with mISDN (not sure about DAHDI yet - not tried the new release).
HTH -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Olivier Sent: 17 December 2008 08:14 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] libpri and NT-Point to multi-point Hi, At the moment, libpri /w Asterisk 1.6, Dahdi 2.1, is not supporting NT-Point to multi-point mode. Here (France), most small PBXes are connected to ISDN through BRI trunks in PtmP (don't know why but it seems the general case). So this NT-PtmP function would be very helpful to easily slide an Asterisk box between an existing PBX and the network. Does the same case apply elsewhere (UK, Germany, Italy, ...) ? Do you think this is needed ? Regards _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
