On Mon, Dec 01, 2008 at 10:09:06AM +0100, Olivier wrote:
> Hi,
>
> Hardware is b410p with :
> - span1 jumpers set to NT (no 100 ohm termination)
> - span2 jumpers set to TE (no 100 ohm termination)
> - straight cable from port1 to port2
>
> Scheme:
>
> --------------------
> 1----------
> | | <------ cat5 patch cord
> 2----------
> B410P |
> 3
> |
> 4
> |
> --------------------
>
>
>
> /etc/dahdi/system.conf :
> span=1,0,0,ccs,ami
> bchan=1,2
> dchan=3
> span=2,1,0,ccs,ami
> bchan=4,5
> dchan=6
s/dchan/hardhdlc/
This is one of the defaults that needs changing in dahdi_genconf .
Probably will happen when we fix our BRI driver to support hardhdlc :-)
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
