Hi Folks, I'm trying to send CallerID Name information out to the PSTN via a PRI with Bell Canada with no success. With inbound calls (originating from the PSTN) CNAM is received successfully, and we've not had any similar problems with other Telco PRIs, so I'm stumped.
>From searching the list archives, I believe that a DMS wants to receive the CNAM info in the Q.931 call setup message. I've tried all permutations of switchtype (dms100 & national) and facilityenable that I can think of, but I still don't see CNAM coming out the other side. Telco confirms that "Name Out" is enabled on our PRI. Any pointers on what I'm missing, and/or how to debug further? zapata.conf: --- [channels] context=default callerid=asreceived usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=no transfer=no canpark=yes cancallforward=no callreturn=no echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 ;facilityenable=yes immediate=no priindication=outofband switchtype=national context=from-pstn group=0 signalling=pri_cpe channel =>1-23 --- Regards, Iain _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
