I am having a problem interacting with a remote IVR system when the outbound call is going via SIP. The only way that I have been able to get a response from the IVR is to set dtmfmode=info in sip.conf.
Unfortunately that doesn't quite fix the problem because it will still only accept DTMF input once the voice response has finished on the IVR. If I try and press anything while the IVR is still talking it doesn't recognise any of the digits. I get the same result no matter what handset I use to originate the call i.e IP or POTS handset. The SIP IVR works fine if I connect directly to it using a SIP proxy + IP phone so I am pretty sure the problem is with the way that * is handling the DTMF. I found a post on the mailing list which suggested removing DTMF detection while the far end is still talking. If that has been implemented then that could explain the problem. Anyone got any suggestions? Thanks Hamish _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
