Actually, I'm using: Version: v3.0.0 atasip (Build 031210A)
AudioMode: 0x00140014 CallFeatures: 0x00000000 PadiFeatures: 0x00000000 CallerIdMethod: 0x00019e60 FeatureTimer: 0x00000000 FeatureTimer2: 0x0000001e Polarity: 0x00000000 ConnectMode: 0x00460400 TimeZone: 17 TOS: 0x000000a0 SigTimer: 0x01418564 OpFlags: 0x00000002 VLANSetting: 0x0000002b Please re-check your sip.conf configuration, make sure that pickupgroup and callgroup are present and correctly referenced with another device. Hope this helps Regards, Gustavo ----- Original Message ----- From: "Anton Yurchenko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, December 29, 2003 8:30 AM Subject: Re: [Asterisk-Users] call pickup via *8 from ata186 (SIP) > CW_ASN wrote: > > >It works for me with sip 2.15, 2.16.x and 3 versions. > > > > > > > > I have FW version : > > *ata0009e88e33cd* > Version: v2.15 ata18x (Build 020927a) > MAC: 0.9.232.142.51.205 > > what other parameters should I use? What AudioMode? > > thanks > > >----- Original Message ----- > >From: "Anton Yurchenko" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Monday, December 29, 2003 6:42 AM > >Subject: [Asterisk-Users] call pickup via *8 from ata186 (SIP) > > > > > > > > > >>Hello, > >> > >>Does call pickup works with ATA-186 SIP? at the same pbx it works with > >>MGCP but bit ata-186 with SIP it doesnt work, just nothing happens. > >>Anyone have it working? Also it seems that when typing "reload" on the > >>console, the asterisk doesnt reread the mgcp.conf. > >> > >>please answer > >> > >>Thanks > >> > >>-- > >> > >>Anton Yurchenko<[EMAIL PROTECTED]> > >>Digital Generation > >> > >> > Anton Yurchenko<[EMAIL PROTECTED]> > Digital Generation > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
