Don Pobanz wrote: >> Joe Pukepail wrote: >> >> Is there a way to see error counts on the T1 of a PRI? >> Hooked up to asterisk via a digium TE122. Looking for >> something to make sure I'm not getting any CRC, framing or >> other errors on the T1. >> >> > > Many moons ago I use to used a program called zttool. It allowed looking > at spans and the alarm state and bipolar errors and bit errors etc. You > could also see which channels were in use and look at signaling bits. > > Anyhow this program sits in the zaptel directory. You may want to check > it out. > > Don Pobanz > > -- > MailDefender Message Security: Click below to verify authenticity > http://www.exchangedefender.com/verify.asp?id=m4LIME3X015989&[EMAIL PROTECTED] > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > It compiles by default with Zaptel at this point, IIRC. Very handy tool
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
