Quoting Jaap Winius <[EMAIL PROTECTED]>: > Hi list, > > Hopefully, some of our Dutch members can help with this one. I'm also > based in the Netherlands and am using a Sipura (Linksys) SPA-3000 > (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test > system. It works fine, except that the Called ID (CID) is not working. > I'm aware that KPN (our local telco) requires a separate subscription > to activate CID on POTS lines and I've confirmed that is working. Yet, > I've not been able to get the SPA-3000 to pas the CID on to Asterisk, > and I know of no relevant SPA-3000 settings for doing this other than: > > * Regional > Miscellaneous > Caller ID Method: ETSI DTMF with PR > > * PSTN Line > PSTN-To-VoIP Gateway Setup > PSTN CID For VoIP CID: yes > > As some have suggested, I've also set the Regional / Miscellaneous / > Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to > me as it should not make a difference once you've selected a DTMF CID > method. > > I've also experimented with increasing the answer and ring-through > delays, but this makes no difference. I've been told that this is > because KPN always sends the CID on ahead of the rest of the call to > begin with. > > Could it be that I'm missing something? > > Thanks, > > Jaap
Hi Jaap, I have a SPA3102 which is supposed to be similar. Make sure you leave the PSTN --> Subscriber Information --> Display Name blank. Also, in your sip.conf file, do not specify any "callerid=" value. This probably isn't your issue, but I thought just in case... Tim _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
