#span=4,0,0,cas,hdb3 ^ uncomment that
and cas=1-15:1101 cas=17-31:1101 cas=32-46:1101 cas=48-62:1101 cas=63-77:1101 cas=79-93:1101 unused=94-124 #whatever your ending is Roger C. Beraldi Martins wrote: > Richard, > > so I sould use 'unused' for de 4th span, but I don't find information > about how do this > configuration. I think it's something like this: > > span=4,0,0,unused > > that's it ? What do you think ? > > If it's dosn't work I will check for de cable buildings. > > Thank you for your help ! > > > 2007/12/3, Richard Lyman <[EMAIL PROTECTED]>: > >> Roger C. Beraldi Martins wrote: >> >>> Dear members of the list, >>> >>> I have difficulties to obtain sync with a Digium TE420 PCI Express >>> For four entries E1, In my case I am with only 3 E1s available to >>> configure. The >>> telephony operator is BrasilTelecom and Signaling is R2 Digital. >>> >>> >> *snipped >> >>> The first three spans are configured (and connected to modens) but >>> I am getting RED in zttool (end on the board leds) the fourth are not >>> configured (commented). >>> >>> >> *snipped >> >>> cat /etc/zaptel.conf >>> >>> ------- >>> >>> # MFC/R2 does not normally use CRC4 >>> loadzone = br >>> defaultzone = br >>> >>> span=1,1,0,cas,hdb3 >>> span=2,0,0,cas,hdb3 >>> span=3,0,0,cas,hdb3 >>> #span=4,0,0,cas,hdb3 >>> >>> cas=1-15:1101 >>> cas=17-31:1101 >>> >>> cas=32-46:1101 >>> cas=48-62:1101 >>> >>> cas=63-77:1101 >>> cas=79-93:1101 >>> >>> >>> >> use 'unused' to for remaining channels for that 4th span. >> >> *snipped >> >> you should always define all the 'spans', and just disable them via >> 'unused', vice only partially configuring the card. >> >> this may not be your cause (i guess the cable), but at least you can >> test this without having to hunt down/make a new cable. >> >> goodluck >> >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> > > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
