looks like something wrong with the dial plan in the extensions.conf.. i
would recommend start debug on and see the content of "full" log may be
that give some clue.
Thanks,
Vivek
On 11/30/07, Russell Brown <[EMAIL PROTECTED]> wrote:
>
>
> I have two Asterisk systems that can route to each other via a VPN with
> firewalls disabled for testing purposes.
>
> Each Server can see (tested via nmap) UDP port 5060 on the other.
>
> So... I thought that I could simply use a Dial command in Server A's
> config to place a SIP call to Server B... but it doesn't seem to work.
>
> Server A (192.168.1.33) has:
>
> exten => *136,1,Dial(SIP/[EMAIL PROTECTED],30)
>
> but whenever a user on Server A dials '*136' the call doesn't complete
> and the CLI shows:
>
> Executing [EMAIL PROTECTED]:1] Dial("SIP/112-0071f650", "
> SIP/[EMAIL PROTECTED]|30") in new stack
> -- Called [EMAIL PROTECTED]
> -- SIP/10.10.111.13-00793520 is circuit-busy
> == Everyone is busy/congested at this time (1:0/1/0)
>
> I can't see anything in Server B's logs from 192.168.1.33
>
> What am I missing?
>
> Any pointers to help me get this working?
>
> --
> Regards,
> Russell
> --------------------------------------------------------------------
> | Russell Brown | MAIL: [EMAIL PROTECTED] PHONE: 01780 471800 |
> | Lady Lodge Systems | WWW Work: http://www.lls.com |
> | Peterborough, England | WWW Play: http://www.ruffle.me.uk |
> --------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
