The SME+ has a PCI bridge chip btw the 133MHz and 100Mhz slots so you might want to try moving it to a slot on the other side of the bridge. I believe that card will work in any of the slots.
-----Original Message----- From: kido [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 19, 2007 6:01 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Supermicro PDSME+ and TE110P Hello all, Has anyone use the Supermicro PDSME+ in combination with the TE110P successfully? My experience so far is not very good. I am running trixbox 2.0 but: 1) with zttool I am getting IRQ Misses. Don't seem to have IRQ conflict, but I am now running my SATA HD in DMA. And I am not able to set it in DMA(HIO... operation not permitted) 2) With zttool the Alarm is RED 3) When I do the loopback cable Pin 1 going to 4 and Pin 2 going to 5, the status led does not turn green... Any Hints? Ideas? Thanks K. _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
