I can setup one 104s with a Nat router between it and *
dg104s----lan-------nat----lan-----asterisk-----lan------dg014s That works great But if I try dg104s-----lan-------nat---internet----nat------internet------asterisk------ -------dg104s a 1 2 b No luck The dg104 a has no dial tone, now here is what is odd if I dial a from b a rings but cannot answer and continues to ring in b's handset I setup a as dmz host on nat 1 and have port 2427 mapped to * on nat 2 James Schenck Egraph Design Inc. Arkansas Online Internet Services (870) 857-3287 IAXTEL (700) 857-3287 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Joakimsen Sent: Saturday, December 06, 2003 11:41 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] MGCP IADs Have you tried just the DG104s behind nat? Have you had any issues with call waiting? > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of James Schenck > Sent: Saturday, December 06, 2003 9:26 AM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] MGCP IADs > > I am new to * and after getting some much needed help from someone on the > IRC channel with my config files I got my system up and going. > I have several dlink DG 104s's and they seem to work fine on my LAN the > only > trouble I have is trying to get them to work thru double Nat by that I > mean on both ends. My * box is behind Nat and I am trying to setup a > 104s at > another location behind Nat no luck so far but I will get it somehow. > I have read in the lists that they loose their config but I have not had > that trouble the only advice I have is if you upgrade the firmware reset > to > factory default after then configure the units with a serial cable > > > James Schenck > Egraph Design Inc. > Arkansas Online Internet Services > (870) 857-3287 > IAXTEL(700) 857-3287 > [EMAIL PROTECTED] > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Juan J. > Sierralta P. > Sent: Friday, December 05, 2003 11:14 PM > To: Asterisk Users > Subject: [Asterisk-Users] MGCP IADs > > Hi, > > For MGCP users. Is there any success stories with any MGCP IAD > vendor. > I�m trying to find an IAD which works with Asterisk. I�ve tried the Cisco > IAD 2430 without success; but SIP on this IAD works but it�s limited (no > authentication, no notify messages, etc) and with higher density IAD (16 > or > more ports) it�s nice to control using MGCP. > Any information will be apreciated ! > > Thanks. > -- > Juanjo sin .sig > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
