Carlos, Do you have the NAT keepalive options enabled on the PAP2T? It sounds like the router is timing out the connection and dropping the port mapping.
-- Eric Chamberlain, CISSP Chief Technical Officer Voxilla - http://voxilla.com/ > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Carlos Chavez > Sent: Thursday, August 16, 2007 9:09 AM > To: Asterisk > Subject: [asterisk-users] Asterisk, PAP2T and 2Wire DSL router > > Here is Mexico the phone company uses a DSL router from 2Wire which > in > my opinion is quite bad. I am having problems getting PAP2T adapters > connected to Asterisk using these routers. They connect fine but after > about 5 minutes I get a message on the Asterisk console that the ATA is > unreachable. So far the only way I have found for the ATA to stay > connected more than five minutes is to put it in the DMZ but this is not > always possible either because the DMZ is already in use by some other > computer, they do not use DHCP and this router cannot assign a DMZ if > you do not use DHCP or simply because you have more than one ATA on the > network. > > Does anyone know of a tweak to this router that will allow the ATA > to > remain connected to Asterisk? This only seems to affect Linksys and > Sipura ATAs because when you have phones on the same network > (Grandstream) those do not lose the connection to the server. > > -- > Telecomunicaciones Abiertas de México S.A. de C.V. > Carlos Chávez Prats > Director de Tecnología > +52-55-91169161 ext 2001 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
