Thanks, Julian. I saw this explanation, and it does not apply. There is no "hangup supervision" with my carrier. I think they used to have it, when I had different number, but even then it was not 30 seconds, but more like 3 to 5.
I am now inclined to think that it has something to do with a cell phone provider. I am going to run more tests today using regular land line and report what's up. Alex > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Julian J. M. > Sent: Monday, August 06, 2007 2:07 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Telco is not detecting HangUp w/ TDM400P > > That's ok, and is expected behaviour. The telco will keep the line > open for about 30 seconds. It's useful when there is no PBX, and just > 2 or 3 phones attached to the same line... you can hangup on one room, > go to another, pickup and continue the conversation. > > Anyway, i guess the telco can reduce that timeout or remove it > completely. Just tell them you have a PBX on that line. > > Julian J. M. > > On 8/6/07, Alex Pankratov <[EMAIL PROTECTED]> wrote: > > Hi guys, > > > > I spent a couple of hours in Google, but the problem > > appears to be uncommon, so I'd like to ask about it here. > > > > The problem is exactly the opposite to "Asterisk does > > not detect FXO hangup". In my case it's the Telco who > > does not appear to be detecting Asterisk's hangups. > > > > Telco is Telus in Vancouver, Canada. The setup is very > > simple - > > > > Telco -> FXO/TDM400p -> * -> softphone > > > > The log is - > > > > -- Starting simple switch on 'Zap/4-1' > > -- Executing [EMAIL PROTECTED]:1] Answer("Zap/4-1", "") in new stack > > -- Executing [EMAIL PROTECTED]:2] Dial("Zap/4-1", > "IAX2/alex|5|r") in new > > stack > > -- Called alex > > -- Call accepted by 192.168.1.102 (format gsm) > > -- Format for call is gsm > > -- IAX2/alex-2 is ringing > > -- Nobody picked up in 5000 ms > > -- Hungup 'IAX2/alex-2' > > -- Executing [EMAIL PROTECTED]:3] Hangup("Zap/4-1", "") in new stack > > -- Hungup 'Zap/4-1' > > > > At this point the caller (say, me on my cell phone) still > > sits connected and enjoying the white noise. The longest I > > waited was about 20 seconds and then I hung up. > > > > Similar problem is described here (November 2006) - > > > > > http://lists.digium.com/pipermail/asterisk-dev/2006-November/0 24768.html > > > > but there's no solution and the discussion is not very > > helpful. > > > > Any pointers and/or ideas are greatly appreciated. > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
