El Fri, Jul 27 de 2007 a las 11:18 -0500, Carlos Chavez comentaba: > Try changing protocol variant to: protocolvariant=mx,10,4
I've already tried several combinations. I dont know exactly what means each number but I could get an idea according what I saw in the logs. Even so, I've tried it and the only difference is: CRN 32769 - Offered on channel 0 (ANI: 8147779999, DNIS: 8332, Cat: 1) Thats why I put 10,10.. because I wanted the ANI to be 10 digits length and the DNIS 10 digits length. > Usually only you only need the last 4 digits of the DID to identify it. > Also, you only get 8 digits for the DNIS because that is the maximum > anyone will dial to get to you (7 if you are in a smaller city). ANI is > always 10 in Mexico. I'm not connecting to any telco, instead I'm connecting the E1 to a CISCO device which is supposedly to be correctly configured. Said that, I am realizing that maybe I should put some other value instead of 'mx'. I will give it a try. If this is correct.. Do you know what should be there? Thanks.. -- Victor Toofic _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
