Hi Arjan, As I see it, the issue at hand is as follows:
You are attempting to provide a tandem service, meaning as you say no charge to the originator unless the called party answers. However under this circumstance you want to also provide a non-standard call treatment to the line without an answer occurring. Standard treatment is to allow the originating Switch/device to continue to provide the ringing condition to the originators phone while the outbound attempt is being completed. Very few carriers that utilize digital services (non-analog) do not propagate audio back to the originating caller until such time as an answer has been accomplished. SO, this leads me to asking the following, how are the callers originating calls into your system, what are they using for authentication as well as indication of desired outbound calling data? Dave On Fri, 2007-06-22 at 08:22 +0200, Arjan Kroon wrote: > Yes Dave, > > We want to use to principle for the following reason. > If the outbound call is not picked up, the inbound caller won't be > charged for the call, because there was no answer. > > Arjan > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Boyd > Sent: dinsdag 19 juni 2007 17:03 > To: Lee Jenkins > Cc: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Play dial tone withou answer > > Yes Lee, he could, however he doesn't want to answer the call until the > call has been completed on the outbound leg. > > Dave > > On Tue, 2007-06-19 at 10:26 -0400, Lee Jenkins wrote: > > David Boyd wrote: > > > Two points, > > > > > > > > > > > > first (I believe from many previous threads, and viewing source code > > > ) you must answer a call to place audio on the channel. > > > > > > second, depending on the type of access being used by the originator > of > > > the call, the carrier will not pass audio on the channel back to the > > > originator unless they receive an answer indication from asterisk, > so > > > even if you could place audio on the channel without an answer, > there is > > > no guarantee still it would propagate back to the originator of the > > > call. > > > > > > > > > > Can't he just setup an extension to Answer() the call, play message or > > > Ringing() and then transfer the call? > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
