>From reading the SLA docs, SIP hints are use to get the lights on the phone to show the "correct state". I was under the impression that the SIP firmware on the 7960's didn't support the SIP hints properly (or at all), which means that SLA won't work properly on a 7960.
If anyone has gotten this to work, I'd like to hear about it. --Jason. John C. Wolosuk Jr. wrote: > Has anyone had any success with getting SLA going between 2 SIP phones? > (Particularly a set of Cisco 79xx's) The SLA document that comes with > the asterisk source is about as clear as mud. > > Does anyone have a working sip.conf, sla.conf, and extensions.conf that > I can use for reference? > > The part I'm most confused about is how to build the lines in sip.conf > and how the phones should behave. It seems apparent that the phones > should not register with asterisk, otherwise all the phones will try to > register to be THE phone for a given extension. should these lines be > built like a trunk/peer? if I could be an example of how lines for SLA > should look in sip.conf, that would be helpful. > > Also I'm somewhat annoyed that I have to compile zaptel drivers that I > don't use in order to compile the app_meetme.so module so I can have the > SLA functions available to the dialplan... > > Any feedback is greatly appreciated! > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
