Rob Schall wrote:
We have the caller id with name option enabled with our provider,
however, our polycom 501 phones will only display the number of the
incoming call. Is there a way to see the callerid name from the cli when
the call is coming in (like a print in the dial plan)? I'm not sure if
the problem is with asterisk or our phones. I did turn on the
calleridpres option in zapata, but I'm unsure what else needs to be set.
I bet you have something like this:
s,1,Dial(SIP/polycom)
When you should in fact have something more like
s,1,Wait(0.5)
s,n,Dial(SIP/polycom)
Caller ID Name information takes a little bit longer to come in, on a
PRI as I'm assuming you're using.
HTH,
Trevor
--
Does your Canadian VoIP service need CRTC-compliant 9-1-1 services? Please
visit http://www.digitalcon.ca/voip9-1-1/ to find out more!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
