On Sat, 3 Mar 2007, Mike D'Ambrogia wrote:
Wanting to connect my asterisk box off of 2 unused analog extensions on
the non* PBX system.
Can I bring those lines in to * on XP100 FXO cards?
Any special wiring/open loop issues to watch for?
You might be better off with one TDM400P card with the right modules than
2 XP100's (or 1 Sangoma card) All to do with interrupt sharing concerns...
The desired config is inbound PRI -> non* PBX, attendant picks up and if
caller wants services on * box then xfers call to one of the analog
extensions where * picks up and handles call from that point fwd till
hang up. on hang up analog PBX extension becomes available again.
Currently digging thru content at voip-info.org - it's going to be a
long day...
There should be no "show stoppers" with what you want to do - just treat
the lines from the non * PBX as POTS lines from a remote telephone
exchange and you'll be fine.
Gordon
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
