Mark Engelhardt wrote:
I just installed a PRI and when I make a local (seven digit) call, I
get Code 28 back from the telco, (I believe code 28 means "Invalid
Number") and I hear a fast busy on the phone.
Here is the output:
-- Executing Dial("SIP/marke-17b1", "ZAP/G1/4967171") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called G1/4967171
-- Zap/23-1 is proceeding passing it to SIP/marke-17b1
-- PROGRESS with cause code 28 received
-- Zap/23-1 is making progress passing it to SIP/marke-17b1
As you can see, asterisk is reporting 4967171 as the dialed number
(which is valid)
Cause code 28 means "Invalid Number Format", and, if you're sure the
number is correct, is often a case of you sending the wrong Type Of
Number (TON) when setting up the call.
Take a look at your pridialplan setting in zapata.conf - try "unknown"
first, then other options until you find what works.
A very very handy list I keep close to hand:
http://www.quintum.com/support/xplatform/network/Q931_Disconnect_Cause_Code_List.pdf
Cheers,
Nic.
--
Nic Bellamy,
Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
