I see that you have signaling listed twice. That might be causing a problem.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Tuesday, February 27, 2007 6:54 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1. Jeronimo Romero wrote: > Running Asterisk 1.2.9. I just installed a TE110P card and configured > zaptel.conf & zapata.conf. The config files look right to me but I'm > getting the following error when trying to start asterisk: > > Asterisk died with code 1. > Automatically restarting Asterisk. > > Does anyone have any idea what is wrong with this configuration?? > Thanks in advance!!! > > > Here's my config files: > > zaptel.conf > > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > loadzone=us > defaultzone=us > > Zapata.conf > > [channels] > context=from-pstn > switchtype=national > signalling=pri_cpe > rxwink=300 > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > echocancel=yes > rxgain=0.0 > txgain=0.0 > immediate=yes > group=0 > signalling=pri_cpe > context = from-pstn > channel =>1-23 > > ====================== > Jeronimo Romero > EUS Networks > Email: [EMAIL PROTECTED] > Cell: 917-332-7238 > Office: 212-624-5943 > Web: www.euscorp.com > ====================== > > tail /var/log/asterisk/full will give you good insight. Thanks, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
