Now that you mention it, I did observe the PUBLISH message. Can someone
please tell me exactly the change that was made that fixed this?
(file/lines) I can do a diff -r and see a few changes from CVS but I'd
like to be sure. We have a lot of custom changes as well so it's
non-trivial to update to CVS. I would definitely like to check on this
one patch though. Thanks. - Matt -----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt Lawson
Sent: Thursday, November 20, 2003 7:03 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Solved! Snom 200 Busy signal
As a follow up to my earlier posting, the problem with the Snom 200
Busy
signal was the firmware! I reverted back to 1.16x and everything's OK
- Matt
I had the same type of problem you did when I first upgraded to 2.02t.
But I did a CVS update on 11/19/03, and everything is fine now. What I
did notice (and I have a customer that saw the same thing) is that that
been able to determine what they're publishing with it. But Asterisk
didn't seem to like it until I did a CVS update. It didn't seem to
respond to it. Now Asterisk sends back a "Status: 405 Method Not
Allowed" message, and everything is fine. I can't definitively say this
was the cause because I didn't go back to the old Asterisk code and
verify. But I can tell you that my Snom 200 phones with version 2.02t
work fine now.
Jerry
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
