Hi, i did some tests. If the kernel modules are loaded
Module Size Used by Not tainted wct1xxp 11488 31 zaptel 176256 64 [wct1xxp] ppp_generic 19068 0 [zaptel] slhc 5392 0 [ppp_generic] and the E1 is connected to the PBX, everything is ok. Then i started asterisk, it opens the D-Channel and everything is still ok. I left the system in this state and it survived one night without problems. But immediately after the first call (B-Channel) the system memory is overwritten and bad things happen. I looked through the wct1xxp.c and it looks like the D-Channel (HDLC) is handled between hardware and driver like the B-Channels (no HDLC decoding in hardware), right? That would mean that it is probably software problem. Is there a way to do some test calls without asterisk? cu, Steffen _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
