Thanks all for your input.
Based on the comments given I guess I could
replace the X100p for a TDM22B and then connect the Fax machine to the
TDM22B
and in the dial plan hae
exten => fax,1,Dial(SIP/40) (being the TDM port) and then it will ring
the fax machine
and pass the call in from the PSTN line through the TDM card to the fax
machine?
Right, this is possible also or use an ATA if not a TDM card ?/
Thanks All
Barry
Barry Fawthrop wrote:
Hi All
Curious will this work
Std. PSTN line ---x------ X100p
|
------ Fax Machine
Using a standard "home phone" pstn line with a splitter connecting a
fax machine and X100 Asterisk Box
Incoming Line: Can I have in the dial Plan
[incoming]
exten => s,1,Wait(1)
exten => s,2,IfFax continue to ring, so that the Fax Machine gets it
exten => s,3,Answer
exten => s,4,Playback(Message)
exten => s,5,Dial(SIP/1000&SIP/2000&SIP/3000)
exten => s,6,Hangup()
exten => fax,1,Wait(30)
exten => fax,2,Wait(10)
exten => fax,3,Hangup()
I'm wanting the line to ring,
If it is a fax coming in then Asterisk leaves the line alone and lets
the fax machine handle the call. If it is a call then Asterisk
answers, plays a greeting and rings the IP phones?
Question is how does asterisk detect the call without answering?
I'm not wanting Asterisk to handle the call if it is a fax if possible???
I look forward to your input,
Thank You
Barry
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
