I am trying to do a wire level tap on T1 equipment using digum equipment. So far most call monitoring hardware for call centers try to stay on the analog side requiring a lot of rewiring. I have already posted to the list about T1 "bridging" using DAC's support in the zaptel drivers. I still don't know if I can spy on channel information since I don't have any digium hardware on me until the project begins.
Anybody found a method of spying on a D-Channel and all voice channels using standard T1 equipment? I am making a rough assumption that if I can trick the zaptel drivers into operating without anything responding to a TX signal then I can do the following: S-T1 = T1 to Spy On T1-1 = Digium T1 card #1 T1-2 = Digium T1 card #2 Map S-T1(RX) to T1-1(RX) and S-T1(TX) to T1-2(RX) and decode the D-Channel where appropriate, should I be able to spy on the RX/TX channels enough to make a recording including CID information? This would help in situations where the monitoring system needs to be replaced or taken down without bothering in-progress calls. Shane _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
