Which panasonic system? I'm assuming you are talking about the TDA line. If so get a IP Gateway card on the TDA system, that card uses h323, then configure it with asterisk as h323, or my favorite, get a PRI card on the TDA sysem (unless it's a TDA50 then the option is not available), and a T1 card on asterisk, and create a dialplan on the Panasonic that goes out over the PRI card.
On 1/24/07, John French <[EMAIL PROTECTED]> wrote:
I have a client who has a Panasonic Hybrid system. They are taking in another company as a building tenant and the tenant will be on a new 12 station Asterisk system. This new asterisk system will have 4 FXO ports plus ITSP. The two systems will be separate except that they should tie together for the purposes of dialing extensions directly on the opposite phone system and for transferring calls. I'm looking for advice on how best to accomodate this. Is it possible to do this via the Panasonic's IP interface or will I need to cross connect them via T1 cards? This is my first integration as you can probably surmise. Thanks in advance. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
