hello list, i have a problem regarding the synchronisity (clock source) when using multiple cards. e.g. when having connected one PRI port of our TE410P to the telco, i need to have the analog card like the TDM400P or a B410P synchronous to the clock of our telco provider. otherwise faxing on the analog cards does not work or i get cracking noise or even hangups on my BRI lines, due to bit slips. as long as the ports are on the same pci-card, they're synchronous, but not when one has to use another card (e.g. having a PRI telco line and some analog fax machines or some BRI ISDN equipment served by asterisk)
junghanns or beronet have a solution for this (PCM port on the card; they can even switch the voicedata over this bus), but i can't find any solution for digium cards. i've found a timing connector on the TE410P. can this somehow be utilized? is there another (software) solution? am i the only one with this problem (haven't found anything about this on the mailing list) thanks frank sautter _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
