Remove from zapata.conf the lines re bristuff (bri_cpe_ptmp, etc).
Setup misdn:
/etc/init.d/misdn-init config
vi /etc/misdn-init.conf (check it's ok, NT or TE, PTP or PTMP...)
/etc/init.d/misdn-init start
chkconfig --add misdn-init
Setup chan_misdn, in /etc/asterisk/misdn.conf. At the end:
[telco]
port=1
context=from-pstn
msns=*
Then, in extensions.conf:
exten => _XXXX,1,Set(CALLERID(num)=000000)
exten => _XXXX.,2,Dial(misdn/g:telco/${EXTEN})
Julian J. M.
On 1/2/07, Remco Barendse <[EMAIL PROTECTED]> wrote:
On Fri, 29 Dec 2006, Julian J. M. wrote:
> It's not necessary to recompile the kernel for mISDN support. Check
> http://www.laimbock.com/asterisk/
>
> Grab the mISDN source rpm, and build it.
>
> $ wget
>
http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
> $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm
>
> then check /usr/src/redhat/RPMS/i386/
> You should have the kernel modules and userspace applications. Once
> installed, I could enable chan_misdn in asterisk 1.4 without issue,
> and it's working great in NT mode with ISDN phones. I haven't tested
> asterisk 1.2, but there is no it shouldn't work as well.
I deleted all the bristuff modules i could find plus the old asterisk
libs, compiled zaptel, libpri and asterisk from scratch but can't get it
to work.
First I get errors about something I guess is missing from misdn, later
errors about zaptel.
I'll just toss the HFC-S card and convert the ISDN line to analog.
These are the errors :
.mISDN_close: fid(14) isize(131072) inbuf(0x2a96ee6010) irp(0x2a96ee6010)
iend(0x2a96ee6010)
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: "ports=(null)" (section: intern) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: "ports=(null)" (section: first_extern) invalid or out of
range. Please edit your misdn.conf and then do a "misdn reload".
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: "ports=(null)" (section: second_extern) invalid or out of
range. Please edit your misdn.conf and then do a "misdn reload".
P[ 0] Got: 1 from get_ports
P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS
EXPERIMENTAL!)
......Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown
signalling method 'bri_cpe_ptmp'
Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must
be specified before any channels are.
Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so:
load_module failed, returning -1
Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module
chan_zap.so failed!
Cheers!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
