Louis-David Mitterrand wrote:
On Thu, Nov 30, 2006 at 08:52:50AM -0600, DM wrote:
Setup:
Office A:
router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv
Asterisk: v.1.2.4
static IP
Office B:
router: Linksys WRT54GL running Linksys firmware v4.30.2
Asterisk: v.1.2.7.1
dynamic IP (using dyndns name)
Office A is set up with refresh dns and cron job for iax2 reload every
5 minutes. It rarely looses connection to Office B.
Short story: IAX is still crap in 1.2.13 (haven't tested 1.4), it's
unreliable and perfectly good hosts will become UNREACHABLE for no
apparent reason, while SIP connections keep going through.
For trunking, avoid IAX and use SIP.
For the record I have had 4 asterisk (1.2.6) boxes connected with IAX
trunks (every box registers with every other box) for over 6 months now
with no issues. I did have some issues with a Linksys firewall, but that
was with SIP registrations, not IAX. A firmware update fixed that.
I'm no * dev, but what exactly is so crap about IAX?
-Chris
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
