Hello!
I'm tryuing to bring up an R2 connection but eventhough I've followed
the guidelines in: http://zarzamora.com.mx/asterisk/17 something seems
to be missing.
When an incomming call is generated I get:
Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
MFC/R2 UniCall/24 <- 0001
[1/
1/Idle
/Idle ]
Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Detected
Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Making a new call with CRN 32771
Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
MFC/R2 UniCall/24 1101 ->
[2/
2/Idle
/Idle ]
Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:2672 handle_uc_event:
Unicall/24 event Detected
and that's it, afterwards just a busy tone and the telco guy says the channel
turns "sealed".
When I try an outbound call I get:
-- Attempting call on Unicall/g2/12345678 for [EMAIL PROTECTED]:1 (Retry 1)
Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Call control(1)
Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Make call
Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Making a new call with CRN 32769
Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
MFC/R2 UniCall/24 0001 ->
[1/
1/Idle
/Idle ]
Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event:
Unicall/24 event Dialing
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 seize_ack_wait_expired
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
MFC/R2 UniCall/24 R2 prot. err. [1/
40/Seize
/Idle ] cause 32776 - Seize ack timed out
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
MFC/R2 UniCall/24 1001 ->
[1/
1/Idle
/Idle ]
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event:
Unicall/24 event Protocol failure
-- Unicall/24 protocol error. Cause 32776
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Channel echo cancel
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Channel gains
Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2
UniCall/24 Channel switching
-- Hungup 'UniCall/24-1'
Nov 24 05:53:54 NOTICE[-286483536]: pbx_spool.c:234 attempt_thread: Call failed
to go through, reason 1
Something else funny is happening: as soon as the telco makes a reset
of the trunk they say they start receving data as if the PBX would be
generating calls, then all channels go "sealed" except for 1.
Anyone having an idea on how to solve this?
Alyed
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
