Which version are you using? There was a problem in 1.2.12.1 with the page application. Update to 1.2.13.
David -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Steven Ringwald Envoyé : 15 novembre 2006 13:45 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [asterisk-users] Page() Function Timeout Ken Williams wrote: > I'm trying to use a simple page function. It starts a MeetMe > conference with the devices I've listed, but the devices hang up after > 3-5 seconds. After doing some research I found this was a problem, > and I needed to remove a (5) from app_page.c > > Well, my app_page.c didn't have the (5). I did make clean; make > install again just in case I had some weird compiled version installed > that had the (5) in it. After compiling I restarted the asterisk > service and tried paging again and still had the same problem. > > In the CLI I get the following, which you can see the (5) is still in > there somehow. > > -- Playing 'beep' (language 'en') > -- Launching MeetMe(1010553064d|mqxdw(5)) on SIP/710-09a50038 > -- Created MeetMe conference 1023 for conference '1010553064d' > -- Launching MeetMe(1010553064d|mqxdw(5)) on SIP/717-09a48758 > I've grep'd the entire src folder for \(5\) as well as qxd trying to > find all instances of this, and the only ones are listed in the > app_page.c file. Any suggestions on where to get this rogue (5) out > of here? > > snprintf(meetmeopts, sizeof(meetmeopts), "%ud|%sqxdw", confid, > ast_test_flag(&flags, PAGE_DUPLEX) ? "" : "m"); > > and > > if (!res) { > snprintf(meetmeopts, sizeof(meetmeopts), "%ud|A%sqxd", > confid, $ > pbx_exec(chan, app, meetmeopts, 1); > } > are the only sections of the app_page.c that have the meetme call in it. > > My page functions, fwiw, both have the same problem: > > ;Paging > > exten => 760,1,SIPAddHeader(Call-Info: answer-after=0) > exten => 760,2,Page(SIP/717&SIP/710&SIP/702|d) > exten => 760,3,Hangup > > exten => 761,1,SIPAddHeader(Call-Info: answer-after=0) > exten => 761,2,Page(SIP/717&SIP/710&SIP/702) > exten => 761,3,Hangup > Any suggestions would be very helpful. I had the same problem and ended up changing the 5 to a 300. If you don't specify a (N) after the 'w', I believe it defaults to 5. Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
