Is this inherently an issue with sip? Is it possible for a sip server to actually ring two different sip registration from the same account or is this not possible under any sip enabled pbx?
Thanks again -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anselm Martin Hoffmeister Sent: Sunday, November 12, 2006 4:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] same extension on softphones and hardphones Am Sonntag, den 12.11.2006, 16:29 -0500 schrieb Jeronimo Romero: > Sorry if you see this message repeated twice. I would like to set up > hard phones and softphones with the same extension so that when anybody > in the company dials an extension, each user's hardphone and softphone > will ring at the same time. I've tried setting this up before, but I > noticed that the last sip device to register with the same extension is > the only one that rings when the extension is dialed. The sip devices > they will be using are Grandstream GXP2000 desktop phones and Xten > Eyebeam softphones. Each user will have one of each. What is the best > way to accomplish this? > > > Xten eyebeam ext 110 \ > \ > --> Asterisk 1.2.8 > / > GXP2000 phone ext 110 / One possible solution is to have one sip account for each _device_, not extension; say "sip110h" and "sip110s" for the "110"-user. Then use the "dial" command in your extensions.conf like exten => _1XX,1,Dial(SIP/sip${EXTEN}s&SIP/sip${EXTEN}h) This will cause parallel ringing phones. First come first serve. Hth Anselm _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
