Re: [asterisk-users] In bound SIP context issue

[Alex Robar]

I would think that if the call isn't using the information you've setup under username1, then the call probably isn't coming into your system using username1. Try to verify which username the call is being sent to.

Alex

On 11/3/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:

Hi All,

 

I am trying to configure asterisk to receive an inbound SIP connection and send it to a specified context.  Instead of sending the call the specified context, asterisk is using the context default from [general]?  Any thoughts?  I am sure that it is something simple I am missing.

 

To recap, it is sending calls to the context default, not thecontext...

 

[general]
context=default
srvlookup=yes

 

[username1]
type=peer
username=username1
secret=test1234
host=dynamic
dtmfmode=rfc2833
context=thecontext
nat=no
deny= 0.0.0.0/0.0.0.0
permit=XXX.XXX.XXX.XXX /255.255.255.255
permit=XXX.XXX.XXX.XXX/255.255.255.255
permit=XXX.XXX.XXX.XXX/255.255.255.255
permit=XXX.XXX.XXX.XXX/255.255.255.0
permit=XXX.XXX.XXX.XXX/255.255.255.255

 

Thanks

 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

--
Alex Robar
[EMAIL PROTECTED]

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users