Sounds like some nice work - we are currently finishing off a 200 seat call centre....which has just been _hard_ work.
PaulH On Tue, 2006-10-31 at 02:32 +0800, Craig Guy wrote: > Hi David, > > It can be set on the Sipura / Linksys devices. Look under Admin, Advanced, > Regional, Call Progress Tones. There is a link floating around on Whirlpool > forums to a page and auto provision file containing the correct settings to > produce Australian tones. It also depends on whether the phone allows the > PBX to make the progress tones or whether the phone alone does them. The > setting to control this is in Sipura/Linksys firmware 3.1.10 and higher from > memory. If you want the handset to do the tones, or you get a 'double > ringing' in the handsets of these phones / ATA's then set Admin / Advanced / > Line X / SIP Settings / Sticky 183 to no. > > Btw, how's your Asterisk going? I'm in the middle of doing a 7 site Least > Cost Routed DUNDi setup with redundant routes - Good fun though the learning > curve is a bit steep. > > Craig _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
