I have these DID's coming to my asterisk box and I have a dial plan and all
I want is that it should ring on my cell phone for 20 seconds and if I don't
pickup it would then ring on my home phone. It does the ringing and goes to
the next phone in 20 seconds and every thing works fine but If I pickup the
first phone (cell phone), there is NO voice at all. If I let it go to the
second phone, it works fine and I can talk crystal clear.
It would help to have an example from your extension.conf. Also let
us know what version of Asterisk you are using and your Linux distro.
The second issue is that I don't get a ringback when I dial my DID which is
usually a tone which caller should get so he would know that the bell is
ringing on the other side.
I'm thinking something like that shown below would work in your
extension.conf file. I've assumed you dial out via SIP...
[your-incoming-context]
; Answer the incoming call
exten => s,1,Answer()
; Play ringing for caller
exten => s,n,Ringing()
;Dial your cell
exten => s,n,Dial(SIP/<cell number>@<SIP trunk>,20)
;Check for success
exten => s,n,GotoIf($[("${DIALSTATUS}" = "NOANSWER")]?s-CALLHOME,1)
exten => s,n,Hangup()
;
exten => s-CALLHOME,1,Dial(SIP/<home number>@<SIP trunk>)
exten => s-CALLHOME,n,Hangup()
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
