If the card is an X100P then it simply uses the Zaptel drivers. Just download the zaptel source from the CVS (you probably did when you first downloaded asterisk if you followed the standard instructions) then:
edit /etc/zaptel.conf uncomment the line that says 'fxsks=1' if you have more than one card, change the '=1' to '1-2' or whatever edit /etc/asterisk/zapata.conf read the comments to see what to turn on/off Next, compile the drivers: cd /usr/src/zaptel make clean ; make install modprobe wcfxo You may need to add a file to your init.d folder and your rcX.d folder (X=3 for character mode or 5 if your are running under x-windows) Fairly detailed directions are available from the Digium site. Be sure to note the slight differences in startup stuff for RedHat. Regards - Steven -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Wallace Sent: Thursday, November 06, 2003 12:02 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Redhat driver for the X100P I bought a X100P generic card that claims it uses the same wcfxo driver as the actual X100Ps. Where can I get this? Todd Wallace _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
