Assuming it is a dedicated private line p2p T1....
Assuming that 23 calls at one time is sufficient....
Install a T1 card in each server, plug the T1 in and set one end ofr
pri net, the other for pri cpe.
zaptel.conf and zapata.conf are the files you are looking for. Just
define the 23 channels as a group and dial by the group number.
Using pri will pass callerid info for you across the connection
On Jun 28, 2006, at 9:30 AM, Jonathan Miller wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Your response leads me to further question this setup...
It's a full data T that is not provisioned.
Being that I control the termination at each end, do I get to
specify the
encoding?
On Wednesday 28 June 2006 10:17, Sean Cook wrote:
What kind of T1? TDM? Data? What type of signaling are you
planning
to use e&m? There is a lot of information that that question is
lacking for anyone to advise you ...
Jonathan Miller wrote:
I have a true leased line (a T1) between the two sites.
What parts do I configure for Asterisk to utilized the link
bi-directional?
On Wednesday 28 June 2006 09:09, Andrew Kohlsmith wrote:
On Wednesday 28 June 2006 08:48, Jonathan Miller wrote:
An alternative is to put a router and switch at each end and
extend a
data network to the other site for SIP traffic. Would that
result in better quality calls?
If you can ensure that voice traffic has top priority in all
the
routers
between the two sites, there should be no difference in voice
quality. For
a true point-to-point system this is trivial to achieve, and
maximizes the
bang-for-buck ratio of your interoffice connection.
Obviously having two ADSL connections is not true "point to
point" -- you
will want a leased line, or a dedicated connection to a common
provider who
has the prioritization of voice traffic in your SLA.
You could, in theory, have higher than telco quality voice
calls
with a
VOIP system, as you are no longer restricted to 8kHz-sampled,
16-bit audio.
Naturally the phones must support this for this to work.
What configuration areas are there to be set and how are they
diffent
than just a standard PRI, which I have working now?
If you put a point-to-point DS1 between sites, it's easy.
Asterisk can act
as a PRI CPE or CO endpoint.
-A. _______________________________________________ --Bandwidth
and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options
visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and
Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-----BEGIN PGP SIGNATURE-----
Version: PGP Universal 2.0.6
iQEVAwUBRKKE+JJhYmFK+jfsAQgltAf/U8jI+M953rGssIPngoWR+QBXS8NYt59q
SufUjwhxGJ8Vd1tlnFS4t4OzkJ7csD3Nfz65LEH7fW7/kS6ac2U/WOu5s53+imc+
Ter+0qK2sSwnSzP4eW364TFY4aDH7cxaHa8iqcjuUl3YnowMni29YMu/pa1fD7eD
Rfykz8Pb5pzYx/ojEp0akT9HXW44xUV65+1bakfJJPPDv4sMfLrw69KQGnsHd42t
ZqzxZYlp9GU76ice4dvwMOcRI5KZbDbXqkEx+r+ZA39E3Acap2rjDg4sAZxKa+8h
LxBOoOhugn7TjOJKUva4L48HslkhO9bTJuQc7Iqdu3CoiNUTHMgw+A==
=YPlN
-----END PGP SIGNATURE-----
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
