Hi Silviu, did you manage to get the callername to work? I have a comparable setup with a hipath System but I can´t get the callername to be displayed over the trunk. The callernumber works but not the name...
Any suggestion? Thanks Michael > We have successfully integrated an existing Siemens HiPath 4500 PBX with > two Asterisk servers. > > On the first one we use a H.323 trunk (it needs a card on the PBX, I > think it's called HG3550). It works pretty well, except for one missing > feature - the callerid name is not transmitted over the link (it is a > limitation of the PBX that should disappear when it is upgraded to the > V3 version). The nice thing is it doesn't take any special hardware on > the Asterisk server - you just have to compile and setup an H.323 > channel (asterisk-oh323 works best for us). > > On the second one we have a Digium TE110P connected to the PBX using a > PRI. It works well too, you just need the PBX to have a trunk defined > and you're ready to go. We only use ten channels, so I can't say if the > performance is better. In this case you need libpri and zaptel on the > Asterisk. > > I hope this helps, > > Silviu > > > --- > Hello all, > > I'm new to asterisk. Our company wants to setup an asterisk server and > will eventually move to IP centric phones, but they don't want to just > throw away the old Siemens PBX, so during the process we want to > integrate it with asterisk. Is it possible? and how? > thanks. > Lito _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
