Hi all,
I've got a fairly simple setup, a 4 port zaptel T1 card with 1 PRI and 2
flat e&m T1's coming into it, and its working perfectly except for one
small thing. When people dial any of the numbers on either the PRI or
the T1 from outside of the pbx, they dont get the "ringing" sound. It
just directly connects the call. I know this isnt much, but its started
to bother a couple of people and I was wondering if there was a way to
fix it?
zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
span=2,1,0,esf,b8zs
e&m=25-48
span=3,1,0,esf,b8zs
e&m=49-72
loadzone = us
defaultzone=us
zapata.conf:
[channels]
group = 0
switchtype=national
signalling=pri_cpe
channel=>1-23
group = 1
context=from-trunk
emdigitwait=2500
signalling=em_w
rxwink=300
usecallerid=yes
immediate=no
overlapdial=yes
channel=>25-72
Any help is appreciated.
--
Derek Fedel
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
