On Sun, June 4, 2006 5:10 pm, Gonzalo Servat wrote: > On 6/4/06, Andrew D Kirch <[EMAIL PROTECTED]> wrote: > >> I am currently running Asterisk 1.2.8, on an AMD Sempron 3100+ (ASUS >> K8N >> Nforce based board). I am using a Digium wctdm24xxp to terminate 8 (2x >> quad) FXO lines. Using ztmonitor (From zapata) I cannot see that there >> is any registerable incoming volume from these lines. I've been running >> them at rxgain = 25 (zapata.conf) to make the audio audible, however >> this creates poor call quality issues (static and distortion) on most >> calls, and audio garble in voicemails. Fxotune fails for every line >> with "Could not fill input buffer" I've tried changing PCI slots, played >> with echo settings, and done everything else I can think of to make this >> card play nice to no avial. >> >> Anyone with solutions or ideas, your input will be greatfully >> appreciated. > > Hi, > > > I'm using one of these cards with 3 quad modules (4 x FXO, 8 x FXS) > and I didn't have to touch the rxgain/txgain (0.0 for both). This is how it > should be set. If you need to adjust these settings, then you have another > problem. I know you tried changing PCI slots, but have you looked at > /proc/interrupts to see if the card is sharing an IRQ > with another device? > > Regards, > Gonzalo. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > I should have noted in the above pastage that the card is sitting by itself on IRQ20 (good ol' ACPI) 20: 8421859 IO-APIC-level wctdm24xxp
I wholeheartedly agree that rxgain/txgain should _NEVER_ have to be set that high. -- Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org Security Admin | Summit Open Source Development Group | www.sosdg.org Key At http://www.2mbit.com/~trelane/trelane.key Key fingerprint = B4C2 8083 648B 37A2 4CCE 61D3 16D6 995D 026F 20CF _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
