I tried various DTMF options and it made no difference. I purused goggle on this and I did see other mentions pointing to Sipura and Asterisk as the fault. I would have to say * is to blame as why would it work fine without the transfer option. The DTMF is obviously getting through.
Perhaps it is a configuation problem with my * ??? When I have transfer engaged and hit a DTMF after a call is completed I see another message like this.... Attempting native bridge of SIP/sipurafxs1-49c3 and SIP/sipurafxo1-a93f on each DTMF key hit as I remember. Doug On Sun, 4 Jun 2006, Vahan Yerkanian wrote: > Doug Crompton wrote: > > I am using an SPA-3000 3.1.10d > > > > When I have transfer enabled - 'T' in the dial string I cannot reliably > > send DTMF keys to a bank, voicemail, or other service requiring tones. If > > I disable (remove transfer option) from the dial string all is fine. I > > would like to be able to use features but the ability to have reliable > > DTMF after call completion is more important. > > Make sure you're using SIP INFO as the DTMF transport. > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > "Those that sacrifice essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Ben Franklin (1759) **************************** * Doug Crompton * * Richboro, PA 18954 * * 215-431-6307 * * * * [EMAIL PROTECTED] * * http://www.crompton.com * **************************** _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
