Steve, I am using it to pass a call from sip gateway to my asterisk server and sending the call to the provider thru chan_ss7.
and I have my extension.conf without any timeout and other options.
[general]
static=yes
writeprotect=no
autofallthrough=yes
clearglobalvars=no
priorityjumping=no
[globals]
TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
PREFIX=444
[default]
;;THE GSM NETWORK
exten => _234XX5XXXXXXX,1,Set(CALLERID(number)=1${PREFIX}${EXTEN:-5:4})
exten => _234XX5XXXXXXX,2,Dial(ss7/A/0${EXTEN:-10})
exten => _234XX2XXXXXXX,1,Set(CALLERID(number)=1${PREFIX}${EXTEN:-5:4})
exten => _234XX2XXXXXXX,2,Dial(ss7/B/0${EXTEN:-10})
exten => _2341XXXXXXX,1,Set(CALLERID(number)=${PREFIX}${EXTEN:-5:4})
exten => _2341XXXXXXX,2,Dial(ss7/C/${EXTEN:-7})
and on my sip.cong I specify only g729.
am I running in pass-thru or transcoding?
from the top I can see that at no calls at my server
top - 06:15:38 up 1 day, 5:42, 1 user, load average: 0.72, 0.42, 0.31
Tasks: 50 total, 2 running, 48 sleeping, 0 stopped, 0 zombie
Cpu(s): 5.7% us, 7.0% sy, 0.0% ni, 86.2% id, 1.0% wa, 0.0% hi, 0.0% si
Mem: 4084360k total, 604348k used, 3480012k free, 128832k buffers
Swap: 2031608k total, 0k used, 2031608k free, 222688k cached
and I cannot see what is using up my cpu
thank you
goksie
On 5/31/06, Steve Totaro <[EMAIL PROTECTED]> wrote:
All I know is that it is very processor intensive and either not using
it or just passing it through is your best bet. I will be working alot
with G729 in the near future and will post my findings but until then I
am just relying on the dimensioning page on the wiki.
Thanks,
Steve Totaro
Goke Aruna wrote:
> Steve,
>
> Can you please give me an insight on how g729 problem could solved?
>
> goksie
>
> On 5/30/06, *Steve Totaro* < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED] >> wrote:
>
> G729 is your problem.
>
> Thanks,
> Steve Totaro
> http://www.asteriskhelpdesk.com
>
>
> > -----Original Message-----
> > From: Lachek Butalek [mailto:[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>]
> > Sent: Tuesday, May 30, 2006 10:10 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] I guess my server capacity is ok
> >
> > What process is taking up 100% CPU? Is it Asterisk processes or
> > something else? Also, is the load spread out over multiple
> processes,
> > or do you have one or two processes taking up 90% or more of your
> > total?
> >
> > You also have dual CPUs (and hyperthreading, which to FC3 should
> look
> > like 4 CPUs if I'm not mistaken) - is the 100% CPU usage across all
> > two (or four) processors, or is it only CPU1 that peaks at 100%?
> Have
> > a look at "Last Used CPU" in top. What load are the other CPUs at?
> >
> > I don't have personal experience running that large of an
> > installation, but I imagine your system specs would allow you to
> > handle more simultaneous calls than 50, even though you're doing
> some
> > transcoding.
> >
> > On 5/30/06, Goke Aruna <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
> > > can someone overthere help?
> > >
> > > the server specs are as follows
> > > HP DL380G4 Dual Intel Xeon 3.2GHz processor with 4GB RAM,
> > > running fedora core 3
> > > asterisk-1.2.5
> > > ss7-0.8.3d.
> > > using sip as advised to receive calls from another gateway in
> US.
> > > using g729 in transcoding way.
> > >
> > > however, I noticed the call hit the 51 active calls which is
> > 102channels, I
> > > run "top" to check the system resources usage and i discovered
> that
> the
> > cpu
> > > is 100% used. asterisk, sip, ss7 never crashed throughout.
> > >
> > > however, since transcoding takes alot of system resources..
> how can
> I
> > use
> > > g729 in passthru mode.
> > >
> > > and I guess disabling hyperthreading will save me more system
> resouces.
> > >
> > > I will be glad, if you can give me more info on system management
> cos i
> > > think with that system, it should able to handle at least five
> E1's.
> > >
> > > I say thank you for finding time to reply my mail.
> > >
> > > goksie
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> <http://lists.digium.com/mailman/listinfo/asterisk-users >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> < http://Easynews.com> --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
