On Wednesday 17 May 2006 13:24, M.Masri wrote: > The correct module to load for a TDM Cards interface is wctdm > see http://www.digium.com/en/docs/misc/quick_install_zaptel_asterisk.pdf > > I am baffled.
Firstly, the debian (ubuntu breezy) zaptel driver source distribution version 1:1.0.9-2 seems to not include support for the tdm cards since it never compiled a wctdm. So I checked the source out from CVS and after a struggle to compile and install the drivers (for some reason make install kept on installing the kernel modules in 2.6.10 rather than 2.6.10-13 which I assume is a bug?) I managed to get a wctdm driver which I modprobed and got this in dmesg (below) Everything looks fine except that the card does not answer any calls. Some questions: 1. Does it matter whether I have channel = 1 or channel => 1 in zapata.conf? 2. How does the zttool work and what are the numbers on the display? Any references will be cool. 3. Doesn't the asterisk CLI support configuring zap devices? If I try zap, then it tells me that I should try help. 4. Could there be something wrong with my hardware and how do I verify that? 5. What is the absolute minimum configuration that I need to get the phone line answered? zaptel.conf, zapata.conf ?? Must asterisk be running? Thanks again for all the help. Pieter dmesg Zapata Telephony Interface Registered on major 196 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Not installed Module 2: Not installed Module 3: Not installed Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules) Registered tone zone 3 (Netherlands) Registered tone zone 3 (Netherlands) Registered tone zone 3 (Netherlands) [EMAIL PROTECTED]:/usr/src/zaptel # ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. [EMAIL PROTECTED]:/usr/src/zaptel # cat /etc/zaptel.conf fxsks=1 defaultzone=nl loadzone=nl [EMAIL PROTECTED]:/usr/src/zaptel # cat /etc/asterisk/zapata.conf [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes immediate=no context=incoming signalling=fxs_ks channel = 1 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
