I am trying to use QSIG to interoperate with legacy PBXs.
I am looking to see whether any one knows whether Call Hold, Call Transfer, MWI
works with QSIG support in Asterisk.
Thanks in advance.
--Pillai
On 5/4/06, Olivier Krief <[EMAIL PROTECTED]> wrote:
2006/5/3, Marco Mouta <[EMAIL PROTECTED]>:http://www.voip-info.org/wiki-Asterisk+config+zapata.conf
I've made some tests using this in Portugal and seems to work:
-------------------------------------------------------------------------------
switchtype=qsig ; you may try this in your zapata.conf
------------------------------------------------------------------------------
I suppose you are using PRI access.
But i've also red that qsig is not fully compliant in Asterisk. I've found some PRI states not recognized in asterisk sending CAUSECODE=98 to my legaccy PBX when it seems to me that Asterisk should handle it...
Any ways it seems to work in a standardt architecture:
PSTN--E1---LegacyPBX---QSIG---Asterisk
I hope it helps,
Marco Mouta
For curiosity, what sort of benefit were you after using QSIG ?
Most vendors tout SIP as interoperability protocol.
Did you use QSIG as a way, for instance, to provide Message Waiting Indicator to digital phones ?
Cheers
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
