I have 3 PRIs from different providers, and the fourth port is to a legacy Meridian system... Is it always the same PRI that does not work regardless of which port is used on your Digium card? I don't know if it's significant, but the order of my zaptel.conf is different than yours:
span=1,1,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48 span=3,2,0,esf,b8zs bchan=49-71 dchan=72 span=4,3,0,esf,b8zs bchan=73-95 dchan=96 (Note, I do not have the echo-cancelling card.) On 4/27/06, Wai Wu <[EMAIL PROTECTED]> wrote: > I just tried it. Same problem, one of the two spans is not working. If I > load wct4xxp with vpmsupport=0, then both spans working. > > > > BTW, here is zaptel.conf > > > > > > span=1,1,0,esf,b8zs > > > span=2,2,0,esf,b8zs > > > bchan=1-23 > > > dchan=24 > > > bchan=25-47 > > > dchan=48 > > > loadzone=us > > > defaultzone=us > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
