On Tue, 2003-10-28 at 03:14, Stuart Mackintosh wrote: > Many thanks for this. > > This is more proof of concept than mission critical. I will need to > pinch some channels and send them to SIP phones etc. > > Am I correct in assuming that the hardware I suggested will do exactly > this, or even a E410 so I could connect a couple of PBXs in my workshop > for configuration and testing?
It is my opinion that if you need 2 or more ports, you should go ahead and get the 4 port card. You only loose the flexibility to pull the ports out individually, but cost difference isn't that much and the lower hassle of IRQs is your benefits. Not to mention future expandability. > > > > > > Example: PRI -> E100P -> * -> E100P -> OLD_PBX is what I would like to > > > achieve. Can this be done? > > > Once you have the above 3 items down, then you do want to do what you > > suggested above. > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
