Use a set callerid before your dial statement in extensions.conf.
-----Original Message-----
From: Andrew Nowrot [mailto:[EMAIL PROTECTED]
Sent: Sun 4/2/2006 4:19 PM
To: [email protected]
Cc:
Subject: [Asterisk-Users] Connecting Asterisk to "traditional" phone
central
Hi,
I am trying to connect Asterisk to traditional central. It must be done
over ISDN. I am utilizing Asterisk 1.0.9 from bristuff RC8p. I was able to
communicate them with each other, but I have a problem with callerid. The
traditional central does not recognize the callerid from the phones connected
to Asterisk over Linksys PAP-2.
The service man from the "traditional" central told me that in logs of
the central the callerid is not set. To check it I connected the normal ISDN
phone to the central and in this case the callerid was set. I think the the
problem is in my Asterisk box.
My zapata.conf looks like this:
; Zapata telephony interface
; Configuration file
[channels]
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel = yes
threewaycalling = yes
transfer = yes
immediate = no
callerid = asreceived
usecallerid = yes
group = 1
context = isdn
channel => 1-2
Does anyone have any tips or tricks?
Cheers
Andrew
<<winmail.dat>>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
