> I've got both the A200d and TDM04b in the same box with fc3 and all > works very well. I'd suspect a config issue in your box of some sort. > I didn't have to do anything special.
This is my first FXO/FXS card, so a config issue is likely, but like you said they're pretty straight forward. Incoming calls work fine. For now I have the timeout on the Dial command set high so I can use the line, but I know that's a poor work-around. Here are my configs, just in case it is something stupid on my part. /etc/zaptel.conf fxsls=1-2 fxoks=3-4 loadzone = us defaultzone=us /etc/asterisk/zapata.conf signalling = fxs_ls context=home answeronpolarityswitch=yes callprogress=yes progzone=us callwaiting=yes callwaitingcallerid=yes channel => 1-2 signalling = fxo_ks context=home channel => 3-4 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
