On Mar 19, 2006, at 2:04 PM, Oliver Vermeulen wrote:
<x-tad-smaller>Hi All,</x-tad-smaller>
<x-tad-smaller> </x-tad-smaller>
<x-tad-smaller>Anybody knows how to terminated calls using Grandstream Ht488 and the FXO port ?</x-tad-smaller>
<x-tad-smaller>I can ring the FXO port fine , rings 1once then give me dial tone.</x-tad-smaller>
<x-tad-smaller>
</x-tad-smaller>
I had:
exten => _NXXXXXX,1,Dial(SIP/@2003,60,D(w$EXTEN}))
exten => _NXXXXXX,2,Hangup
Where 2003 was the extension of the FXO on the HT-488. This worked ok for dialing 7 digit calls to the FXO, but also had a weird double (one after the other) ringback?
Also use dtmfmode=RFC2833 in the extension and set the HT-488 the same.
I had to give up on that device due to poor audio quality and echo issues . Also intermittent hanging made this device unacceptable for me.
Let us know if it works for you? Also which firmware and asterisk version are you using?
Marty
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
