I have a tdm22b and the first two ports are FXS and the next two FXO. So the zaptel.conf must be as:
fxoks=1,2
fxsks=3,4
Saludos
Daniel Pizarro
Infobox Peru
ex alumno de la PUCP
On 3/17/06, Diego Quintana Cruz <[EMAIL PROTECTED]> wrote:
Hi everyone,
I have a problem installing interface card tdm22b in a debian etch machine.
First I added manually the zaptel module:
apt-get install zaptel-source kernel-headers-`uname -r`
m-a a-i zaptel
Then I do
tumiwall:/usr/src# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
Does anybody knows why zaptel is not detecting the device??
My /etc/zaptel.conf contains:
fxsks=1,4
fxoks=2,3
which I think is the correct order of my fxs and fxo
Regards from Peru,
--
Diego Quintana a.k.a. RouterMaN
Estudiante Ing de las Telecomunicaciones
PUCP
Linux Registered User #382615 - http://counter.li.org/
http://routerman.blogsome.com
http://planeta.debianperu.org
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
